HobbyZone Carbon Cub S2 1.3 m Cleetus McFarland Special Edition, BNF Basic RC Plane

Please Note: This item is to be purchased in store due to its weight and size.

Cleetus McFarland is a longtime RC enthusiast and a popular American YouTuber. While he's best known for his high-octane cars, RC flying has always been a big part of his life. He first started RC flying on YouTube in 2009 with a HobbyZone Super Cub on floats, and since then, he's probably purchased more Carbon Cub 1.3m models for himself, family and friends than anyone else on the planet! The HobbyZone Carbon Cub S 2 1.3m Cleetus McFarland Special Edition brings the iconic trim cheme of Cleetus McFarland's full-scale CubCrafters Carbon Cub to the best-selling Carbon Cub S 2.

Features:

- Modelled after the CubCrafters Carbon Cub, it’s the most versatile, capable and easy-to-fly scale trainer
- A Special Edition of the iconic Carbon Cub S 2 RTF, inspired by Cleetus McFarland’s full-scale aircraft, complete with exclusive upgrades and extras:
- Authentic Cleetus-inspired decals/markings and a collectable box
- Spare propeller
- Bind-N-Fly convenience – ready to use with your compatible Spektrum DSMX/DSM2 equipped transmitter, battery and charger
- Exclusive SAFE technology makes it easy to learn how to fly, preventing crashes
- Three flight modes (Beginner, Intermediate and Experienced) that you can change with the flick of a switch
- Panic Recovery mode to return your plane to level flight instantly to avoid losing control and crashing
- Capable of aerobatic manoeuvres, including loops, rolls, and upside-down (inverted) flight
- Optional upgrade to SAFE Plus GPS technology with AutoLand, Virtual Fence and Holding Pattern
- For smoother landings, easily install the optional Landing Assist Sensor (LAS)
- Install a 3S 1300mAh LiPo for general flying, or a 3S 2200mAh for longer flight times
- Improved low speed control and STOL capabilities with the optional functional flaps (requires a 7+ channel transmitter, flap servo and servo extension, sold separately)
- Servos, serial receiver and Spektrum flight controller are all factory-installed
- Efficient brushless power system includes a 30A telemetry-capable ESC
- Oversized tundra tyres on the robust landing gear for use on a variety of surfaces
- No glue or special tools required for assembly
- Lightweight yet durable EPO construction
- Optional floats available for water takeoffs and landings
- Spare parts are available
- Practice in RealFlight RC simulator (included with RTF basic, sold separately for BNF Basic)

What's in the Box?

- 1 x HobbyZone Carbon Cub S 2 1.3m Cleetus McFarland Special Edition with:
- 1 x Brushless Outrunner Motor (installed)
- 1 x 30A Brushless Telemetry-Capable ESC (installed)
- 4 x Servos (installed)
- 1 x Spektrum A3230A Flight Controller (installed)
- 1 x Spektrum 4650C Serial Receiver (installed), and: - 1 x Spare propeller
- 1 x Product Manual

Specifications:

- Wingspan: 51" (1295 mm)

- Battery Type: LiPo (3.7V per cell)

- Radio: Sold Separately

- Power Type: Electric

- Minimum Speed Control: 30-amp brushless ESC

- Servos: Included

- Material: EPO

- Recommended Motor Battery: 3S 11.1V 1300–2200mAh LiPo battery with EC3™ or IC3® connector

- Product Length: 34" (864 mm)

- Receiver: Included

- Completion Level: Bind-N-Fly Basic

- Connector Type: IC3

- Approximate Flight Time: 5-15+ min

- Minimum Required Radio: Full-range 6–7+ channel Spektrum DSMX®/DSM2® compatible transmitter

- LiPo Compatibility: 3S

- Motor Type: Brushless

- CG (Center of Gravity): 62-68mm back from leading edge of wing

- Skill Level: Level 1

- Product Weight: 36.1 - 37.9 oz (1023 - 1075g)

- Trim Scheme Colours: Yellow

- Flaps: Optional

- Motor Size: 480-960Kv

- Battery: Sold Separately

- Technology: SAFE

- Charger: Sold Separately

- Approximate Assembly Time: Less than 1 hour

- Propeller Size: 9 x 6

- Speed Control: Included

Required to Complete: - Sold Separately

- 1 x Full-range 6-7 channel Spektrum DSMX/DSM compatible transmitter
- 1 x 3S 11.1V 1300-200mAh LiPo battery with EC3 or IC3 connector
- 1 x Compatible LiPo charger