All-in-one brushed speed controller which can be used for 1/10 RC Crawlers and also Race Cars. The basic setting for the vehicle and battery type is done via "jumpers" on the speed controller.
Features ESC:
- Waterproof and dustproof - suitable for all weather conditions (Clean and dry the ESC after each use to avoid corrosion)
- Specially designed for Brushed RC Cars and Crawlers
- Low internal resistance and excellent heat dissipation
- Multiple protection functions such as low voltage cutoff for LiPo and NiMH batteries, ESC overheat protection and signal loss protection
- Easy to program with pocket-sized jumper and programming card (sold separately - item 2110061)
Specifications ESC:
- Continuous/short-term load: 80A/320A
- Resistance: 0.0014ohm
- Suitable motor types: Brushed standard motors
- Battery recommendation: 2S LiPo / 6 cells NiMH
- BEC 6.0V/5A
- Motor limit 2S LiPo/5-6 cells NiMH: ≥ 11T or <25.000RPM
- Measure: 41.5*35*29.5mm
- Plug system: T-plug
- Weight: 63.4g
Specifications B-Spec Motor:
- Turns: 35T
- Speed: 12.800RPM
- Output power: 85W
- Operating voltage: 7.2-7.4V
- Technical Size: 540
- Motor shaft: Length 12,3mm; Ø 3,18mm
- Motor size: Length 53,2mm; Ø 35,7mm
- Ball bearings: 2
- Weight: 165g
Write a Review
Absima
Absima Brushed 35T Motor & 40A ESC
